Our range of stainless steel trapezoidal threaded spindles includes standard DIN threads and special threads for individual requirements. In addition to different diameters, you can choose between left-hand and right-hand threads, different threads and different thread pitches. Due to the rolled manufacturing process, the spindles have the characteristic features of a high quality product. In addition to the stainless steel versions, Ketterer Antriebe offers a wide range of trapezoidal threaded spindles in steel as well as matching threaded nuts in various materials.
TR 10 l 2 versions to choose from l right-hand thread l multi-start l stainless steel ( 1.4104 ) rolled l length 1000mm l DIN 103 l uninterrupted fibre courseProperties of trapezoidal threaded spindle TR 10 and SG 10 - stainless steel
In addition to our trapezoidal threaded spindles in steel, our variants in stainless steel meet further customer requirements. Like the steel variants, the threaded spindles in stainless steel have different thread designs. While the classic trapezoidal threads (TR) meet the requirements of DIN 103, the special threads are adapted to this and can meet requirements that go beyond the standard. Both the TR10 and SG10 threaded rods have a diameter of 10mm and are available in 1-meter lengths. Both versions are right-hand threaded and have the following key data:
-TR 10x6 P3 (thread pitch 6mm P3 l double thread - right hand thread).
-SG 10x10 P2 (thread pitch 10mm P2 l five-start - right-hand thread)
All of our trapezoidal lead screws go through a rolled manufacturing process. The process gives the spindles an uninterrupted grain, making them a homogeneous material structure. The high strength, durability and high surface quality are just a few of the many qualitative properties of our threaded rods. You would like to complete the spindle with the matching trapezoidal thread nut? Then choose between different materials and shapes your nut for the optimal drive solution.
13012.14-V02L1000
13900.14-V02L1000
Thread
TR 10x6 P3rolledRight-hand threadtwo-course
SG 10x10 P2rolledRight-hand threadfive-course
Material
Stainless steel(1.4021)
Stainless steel (1.4021)
Length
1000mm
1000mm
Matching nut
Round nut in POM / brassFlange nut in POM / brass
Round nut in POM Flange nut in POM
Application Trapezoidal Screw TR 10 and SG 10 - Stainless Steel
The trapezoidal lead screws are used for the transmission of high axial forces and wherever the conversion of a rotary motion into a linear one is required. Other specific areas of application include mechanical engineering, use as a drive and positioning unit, in fastening and clamping applications or within positioning and travel ranges.
TR 12 l 4 versions to choose from l Right and left hand thread l Single or multiple threads l Stainless steel ( 1.4104 ) rolled l Length 1000mm l DIN 103Features Trapezoidal screws TR 12 and SG 12 - stainless steel
Our trapezoidal thread spindles in stainless steel (1.4021) with a diameter of 12mm are available in different thread versions. Besides the standardized trapezoidal thread (TR) according to DIN 103, the variants with special thread (SG) have been adapted to standardized norms. Both thread types are available with right-hand thread:
- TR 12x3 (thread pitch 3mm l single thread - right-hand thread).
- SG 12x12 P4 (thread pitch 12mm P4 l three-start - right-hand thread)
- SG 12x30 P6 (thread pitch 30mm P6 l five-start - right-hand thread)
- SG 12x30 P6 (thread pitch 30mm P6 l five-start - left-hand thread)
The spindles go through the rolled manufacturing process. The threaded rods owe their high strength and uninterrupted grain to this process. The homogeneous material structure is also characterized by the wear-resistant surface and the associated long service life. In addition, the trapezoidal threaded rod combines the ability to transmit large axial forces with mechanical properties such as backlash-free adjustment and readjustment as well as low friction and high surface quality. To optimize the drive solution, you can choose suitable trapezoidal lead screw nuts in different materials and shapes in our online store.
13005.14-V02L1000
13024.14-V02L1000
13517.14-V01L1000
13520.14-V02L1000
Thread
TR 12x3rolledRight-hand threadcatchy
SG 12x12 P4rolledRight-hand thread
three-course
SG 12x30 P6
Right-hand threadfive-course
SG 12x30 P6rolledLeft-hand threadfive-course
Length
1000mm
1000mm
1000mm
1000mm
Material
Edelstahl (1.4021)
Edelstahl (1.4021)
Edelstahl (1.4021)
Edelstahl (1.4021)
Matching nut
Round nut in POM /
Round nut in POM / brassFlange nut in POM / brass
Round nut in PA6-GF30Flange nut in POM
Round nut in stainless steel
Application trapezoidal threaded spindles TR 12 and SG 12 - stainless steel
Both the lead screws with trapezoidal thread and the rods with special thread are considered as drive solutions. They are used wherever a rotary motion is to be converted into a linear one. The trapezoidal threaded spindles made of stainless steel are used in mechanical engineering and in fastening and clamping applications. In addition, a use as a drive and control unit or the use within travels and positioning are options of the spindle.
You have not found the right spindle yet? Then take a look at our spindle range.
TR 14 l 2 versions to choose from l right-hand thread l multi-start l stainless steel ( 1.4104 ) rolled l length 1000mm l DIN 103 l uninterrupted fibre courseCharacteristics trapezoidal threaded spindle SG 14 - stainless steel
Our SG 14 trapezoidal threaded spindles in stainless steel have a special thread which has been adapted to the DIN 380 standard. The thread spindles with a diameter of 14mm vary in their thread pitch:
- SG 14x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread).
- SG 14x30 P5 (thread pitch 30mm P5 l six-start - right-hand thread)
Both versions are available with a length of 1 meter and are characterized by a multi-start right-hand thread, which withstands applications under high loads. The trapezoidal leadscrews are capable of transmitting large axial forces. They are manufactured by the rolled process. Within this, the spindle is given an uninterrupted grain. The homogeneous material structure can thus justify a high strength. In addition, properties such as a high surface quality, backlash-free adjustment and readjustment, low friction and the longevity of the trapezoidal thread spindle can be attributed. In order to use the spindle as an optimal drive solution, we offer you a selection of suitable trapezoidal leadscrew nuts in our store.
13034.14-V02L1000
13112.14-V02L1000
Thread
SG 14x16 P4rolledRight-hand threadfour-course
SG 14x30 P5rolledRight-hand threadsix-course
Material
Stainless steel
Stainless steel
Length
1000mm
1000mm
Matching nut
Round nut in POM / brassFlange nut in POM / brass
Round nut in PA6-GF30
Flange nut in POM
Application Trapezoidal screw SG 14 - Stainless steel
Trapezoidal lead screws are used to drive and transmit axial forces. The application is primarily concerned with the conversion of rotating into linear movements. In addition to mechanical engineering, fastening and clamping applications benefit from the advantages of the spindle. Further fields of application can be found as drive and positioning unit or as part of traverse paths and positioning.
You will find further versions of our trapezoidal lead screws in our range of products and services. Furthermore, we recommend to have a look at our range of trapezoidal leadscrew nuts.
TR 16 l right-hand thread l single thread l stainless steel ( 1.4104 ) rolled l length 1000mm l DIN 103 l uninterrupted fibre courseProperties Trapezoidal thread spindle TR 16x2 and SG 16x4 - stainless steel
In addition to our range of spindles in steel, our selection in stainless steel rounds off our performance spectrum. Trapezoidal thread spindles TR 16 and SG 16 have a spindle diameter of 16mm. This spindle design is available as a classic trapezoidal thread (TR) and as a special thread (SG):
- TR 16x2 (thread pitch 2mm l single thread - right hand thread).
- SG 16x4 (thread pitch 4mm l single thread - right-hand thread)
Our version with trapezoidal thread meets the requirements of DIN 103. The special threads are adapted to this standard and serve wishes outside the standard. The spindles are available in a length of 1 meter.
Due to their trapezoidal profile, the threaded spindles are able to transmit large axial forces. This thread profile is created using the rolled manufacturing process. This process gives the trapezoidal threaded spindle an uninterrupted grain and higher strength. In addition, the threaded spindle is characterized by its wear-resistant surface and the resulting long service life. When used with the appropriate trapezoidal lead screw nut, the lead screw forms an optimal drive solution in diverse areas of application.
13015.14-V00L1000
13001.14-V02L1000
Thread
TR 16x2rolledRight-hand threadcatchy
SG 16x4rolledRechtsgewindecatchy
Material
Stainless steel (1.4021)
Stainless steel (1.4021)
Length
1000mm
1000mm
Matching nut
Round nut in POM / brass
Round nut in POM / brass Flange nut in POM / brass
Application Trapezoidal screws TR 16x2 and SG 16x4 - stainless steel
The trapezoidal lead screw is considered a drive solution and is characterized by the transmission of high axial forces. It is used wherever a rotating motion is to be converted into a linear motion. Other specific applications can be found in mechanical engineering, fastening and clamping applications, as a drive and positioning unit, or for use within travel ranges and positioning.
Take a look at other spindle variants and make your drive complete with matching nut.
SG20 l right-hand thread l single thread l stainless steel (1.4104) rolled l length 1000mm l DIN 103 l uninterrupted fibre courseCharacteristics trapezoidal threaded spindle SG 20 - stainless steel
Our SG 20 trapezoidal threaded spindles in stainless steel have a special thread which has been adapted to the DIN 380 standard. The thread spindles with a diameter of 20mm vary in their thread pitch:
- SG 20x3 (thread pitch 3mm right-hand thread).
Both versions are available with a length of 1 meter and are characterized by a multi-start right-hand thread, which withstands applications under high loads. The trapezoidal leadscrews are capable of transmitting large axial forces. They are manufactured by the rolled process. Within this, the spindle is given an uninterrupted grain. The homogeneous material structure can thus justify a high strength. In addition, properties such as a high surface quality, backlash-free adjustment and readjustment, low friction and the longevity of the trapezoidal thread spindle can be attributed. In order to use the spindle as an optimal drive solution, we offer you a selection of suitable trapezoidal leadscrew nuts in our store.
13305.14-V02L1000
Thread
SG 20x3rolled
Right-hand thread
Material
Stainless steel
Length
1000mm
Matching nut
Round nut Flange nut
Application Trapezoidal screw SG 20 - Stainless steel
The trapezoidal lead screws are used for driving and transmitting axial forces. The application is primarily concerned with the conversion of rotating into linear movements. In addition to mechanical engineering, fastening and clamping applications benefit from the advantages of the spindle. Further fields of application can be found as drive and positioning unit or as part of traverse paths and positioning.
You will find further versions of our trapezoidal lead screws in our range of products and services. Furthermore, we recommend to have a look at our range of trapezoidal leadscrew nuts.
TR8 l 2 versions to choose from l right and left hand thread l single thread l stainless steel ( 1.4104 ) rolled l length 1000mm l DIN 103Properties trapezoidal thread spindle TR 8x1.5 - stainless steel
Analogous to our steel versions, we offer our trapezoidal thread spindles in stainless steel. The diameter of our TR 8x1,5 version is 8mm. The spindles are available in 1-meter lengths. The thread is single-start and right-handed. Due to its trapezoidal profile, the threaded rod is able to transmit high axial forces. Due to the rolled manufacturing process, the spindle becomes a homogeneous material structure with an uninterrupted fiber flow. A wear-resistant surface, the associated durability and high strength indicate the quality of the trapezoidal threaded spindles. In addition to the spindle as such, we offer matching trapezoidal lead screw nuts for an optimal drive solution in various application areas.
13017.14-V02L1000
13017.14-V02L1000
Thread
TR 8x1,5rolledRight-hand thread
catchy
TR 8x1,5rolledRight-hand threadcatchy
Length
1000mm
1000mm
Material
Stainless steel (1.4104)
Stainless steel (1.4104)
mutching nut
Round nut in POM
Round nut in POM
Application Trapezoidal threaded rod TR 8x1,5 - stainless steel
Stainless steel threaded spindles are used to transmit large axial forces and to convert rotary movements into linear ones. Areas such as mechanical engineering benefit from the advantages of the spindle. In addition, the trapezoidal threaded spindle finds relevance in fastening and clamping applications, when used as a drive and positioning unit or when used within travels and positioning.
Further spindle variants as well as supplementary trapezoidal thread nuts can be found under the following links.
€12.26*
This website uses cookies to ensure the best experience possible. More information...