TR 14 flange nuts with trapezoidal thread brass

From €38.35 *

Prices incl. VAT plus shipping costs

Version:

Attachment of flange:

Thread:

  • 13034.20-08-TDC122
  • 0.06 kg
TR14 l 2 versions to choose from l Right-hand thread l Outer diameter 38mm l Length 18mm l... more
Product information "TR 14 flange nuts with trapezoidal thread brass"

TR14 l 2 versions to choose from l Right-hand thread l Outer diameter 38mm l Length 18mm l Brass l Based on DIN 380

Properties flanged nut with trapezoidal thread SG 14 brass

SG 14 spindle nuts have a nominal thread size of 14mm. The thread is characterized as a special thread (SG). The special threads from Ketterer Antriebe are based on DIN and at the same time meet individual customer requirements. The trapezoidal thread nuts with flange are characterized by their enlarged contact surface. This guarantees a secure hold, which is also supported by the 6-hole fastening. The spindle nuts offered here have multi-start thread versions:

- SG 14x16 P4 (thread pitch 16mm P4 l four-start - right-hand thread)

- SG 14x20 P4 (thread pitch 20mm P4 l five-start - right-hand thread)

By means of a machining manufacturing process, the flange nuts are made of brass. The brass used is a special brass (CuZn40Al2) and is characterized by its high corrosion resistance.

  13034.20-08 13042.20-04
Gewinde           SG 14x16 P4
Right-hand thread
four-course
DIN 380   
SG 14x20 P4
Right-hand thread
five-course
DIN 380
Abmessungen Flange d1: 18mm
Flange d2: 38mm
Flange d3: 28mm     
Length a: 18mm
High b: 6mm
Chamfer f1: 0,25x45°
Chamfer f2: 0,25x45°
Chamfer f3: 1x45°
Radis r1: 0,4
d4 (6x): 4,3
Tolerance field: 7H
Flange d1: 18mm
Flange d2: 38mm
Flange d3: 28mm     
Length a: 18mm
High b: 6mm
Chamfer f1: 0,25x45°
Chamfer f2: 0,25x45°
Chamfer f3: 1x45°
Radis r1: 0,4
d4 (6x): 4,3
Tolerance field: 7H
Befestigung 6-hole 6-hole  
Material Brass (CuZn40Al2)    Brass (CuZn40Al2)     
Passende Spindel   Trapezoidal thread spindle in steeland stainless steel Trapezoidal threaded spindle in steel

Application Flange nut with trapezoidal thread SG 14 Brass 

The flange nuts are suitable for use, for example, with adapter plates, indexing plungers or exhaust suspensions. In addition, drive solutions can be generated in combination with our trapezoidal thread spindles. These allow rotating movements to be converted into linear ones, even under high loads. 

Not found a suitable nut? Then it is worth taking a look at our large selection of trapezoidal threaded nuts:

more flange nuts with trapezoidal thread in POM

- Round nuts with trapezoidal thread in POM,

- brass or PA6-GF30

- Square nuts with trapezoidal thread in POM

Related links to "TR 14 flange nuts with trapezoidal thread brass"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "TR 14 flange nuts with trapezoidal thread brass"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed