DC spindle drives are the solution for stepless
electromotive adjustments. The slim and compact design characterises our
actuators, making them particularly suitable for use in table frames.
The integrated travel measuring system in combination with our controls
makes limit switches and stops superfluous in your application.
Motorized solution for the
individual sit-stand workplace. Stepless height adjustment to customer specific
stroke. The included cable can be ordered here as a spare part.Special featuresA sleek design allows the
complete inline actuator to be integrated into the tube of a table leg.Simple mountingIntegrated position measuring systemSingle telescopic function
Model3120.00-V02EXXXHXXXMotorDC Motor 24 VSensor/Power supplyHall/5 V DC/0,3 AProtection classIP30Duty cycle20% (at 5 Min.)Idle running speed100 rpm (24 V)150 rpm *Stroke max.retracted height -109 mmType of spindleSG14x16P4 RH Max. lifting force800 NMax. drive torque3 NmMovement speed43 mm/s* in combination with LogicData control box Compact-3
Nominal speed 120rpm l Static pressure load 10,000N l Static tensile load 10,000 N l Maintenance-free l 2 versions selectable
Electromotive screen drive - set
Electrified drive system consisting of motor, control, spindle and spindle nut. The drive is designed for high tensile and compressive forces. The self-locking system design ensures safe operation. In addition to the drive system, a 1-channel remote control is also included in the set.
Technical data
Series
3062
Voltage
230V~/50Hz
Current
1,0 A
Inrush current (factor)
X 1,2
Power motor
220 W
Rated torque
5 Nm /
Peak torque
7 Nm (kurzzeitig)
No-load speed
134 U/min
Rated speed
120 U/min bei 5Nm
Operating mode
2,5 min on, 45 min off
Ambient temperature / humidity
Operation T=-10°C …. +60°C /H max. 90% Storage: T=-15°C….+70°C / dry non-condensing
Operating temperature Motor
overheating protection with shutdown at approx. 110°C
Protection class
IP40
Max. short-time static pressure load
10.000 N
Max short-time static tensile load
10.000 N
Spindle type
25 x 4
Travel speed at nominal load
8 mm/s
Scope of delivery
The set includes:
1 x electromotive spindle drive, consisting of the motor incl. control unit
1 x 1-channel remote control
1 x spindle 25 x 4 / 1,5 m long
1 x spindle nut
1 x crank with safety spring for note locking (optional)
Technical notes
After shutdown due to overheating min 15 min pause time is necessary
Installation dimension 589 l Stroke 525 l Lifting force 900 N l Travel 20mm/rev l With and without motor mounting l Travel speed 40mm/s lUniversally applicable lifting
unit with a bevel gear head for linear drive solutions. Possible applications
are height adjustable tables, various adjustment functions for furniture items
as well as all manner of linear adjustment in residential, mobile home or industrial
fields.Special featuresIdeal for the drives: 3112.00/ 3133.00 / 3133.48
/ 3130.00Available in customized spindle lengthsSimple mountingConnection to the drive hex 9 mmModel3130.14-V01EXXXHXXX 3130.14-V02EXXXHXXXType of spindleSG14x20P4 RHTravel path20 mm/rotationTraverse speed*40 mm/s*Max. strokeretracted length -64 mmMax. lifting force900 NRequired drive torque3,5 Nm * In combination with motor 3133 and LogicData control box Compact-3Technical notesThe lifting units must be protected against lateral
forces by a separate guide system.Attention: The spindle systems with a spindle pitch
> 3mm may not be self-locking. Check the self-locking effect in the
application. The lifting unit is only pressure loadable.Incorrect dimensioning of the guide system can damage
the lifting unit: Please note the design and safety instructions for spindle
drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
2 Varianten zur Auswahl l Hub 720 mm l Hubkraft 900 N l Verfahrweg 40mm/s l Maximaler Hub bei minimalem EinbaumaßTwofold telescopic lifting unit with bevel gear head for various linear
drive solutions. Ideal for electromotive sit-stand workplace applications or
wherever an infinite linear adjustment is required at a high speed, maximum
stroke with a minimum installation dimension.Special featuresDouble speed through synchronous telescope designMaximum stroke with minimum installation dimensionIdeal for electromotive drivesTechnical notesThe lifting units must be protected against lateral
forces by a separate guide system.Attention: The spindle systems
with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.The lifting unit is only
pressure loadable.Incorrect dimensioning of the
guide system can damage the lifting unit: Please note the design and safety
instructions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructionBaureihe4115.14-V01E500M4904115.14-V02E495M484Type of spindleSG20x10P2 RH SG10x10P2 RHSG20x10P2 RH SG10x10P2 RHTravel path20 mm/rotation synchronous spindle movement20 mm/rotation synchronous spindle movementTraverse speed*40 mm/s*40 mm/s*Retracted length E500 mm495 mmCentral tube connection M490 mm484 mmEnginge mountnoyesStroke H**720 mm720 mmMax. lifting forcedyn. 900 N stat. 900 Ndyn. 900 N stat. 900 NRequired drive torque3,3 Nm3,3 Nm* In combination with motor 3133 and the LogicData controll box Compact-3** Stroke length of 720 mm is constant at installation dimension between 476 mm and 560 mm
Lifting force 600Nm l Travelling speed 48 mm/s l Simple mounting l Installation space requirement 40x63 mm
Features Inline spindle drive 3122 100-500mm stroke
The electromotive solution for the sit/stand workstation. Infinitely variable height adjustment with customised lifting height. A very slim design enables the complete inline drive to be integrated into the table leg.
Special features Inline spindle drive 100-500mm stroke
Simple attachment
Integrated position measuring system
1-fold telescopic
Technical specifications Inline spindle drive 100-500mm stroke
Series
3122.00-V01EXXXHXXX
Motor
DC Motor 24 V
Sensor/Power supply
Hall/5 V DC/0,3 A
Protection class
IP30
Duty cycle
20% (at 5 Min.)
Idle running speed
180 rpm (24 V) 180 rpm *
Stroke max.
retracted height -171 mm
Type of spindle
SG12x16P4 RH **
Max. lifting force
600 N
Max. drive torque
2,5 Nm
Movement speed
48 mm/s
* in conjunction with LogicData control unit Compact-3
** other spindle types available on request
Safety instructions:
Depending on the spindle used, the self-locking of the system must be checked.
€143.34*
This website uses cookies to ensure the best experience possible. More information...