Simple up-down hand switch for an easy custom control of your stepless adjustment. The hand switch is characterized by a clear design and an ease of use. You can use it with the Compacteco control as well as with any of our motor drives. For parallel operation of hand controls, you can obtain the appropriate Y-cable from us.Supply voltage5VDC+/- 10%Power consumption (average)0mASwitching current50mALife endurance (Switching cycles)10.000Ambient temperature0 - 50°CCable length1800mm +/- 50mmDimensions (L,W,H)56mm x 66,9mm x 17,8mmWeight0,06kg (incl. cable)The hand switches with touch function need the Compacteco control with firmware version 1.9.For programming and varying of the stroke, a hand switch with display is required.
Features hand switchThe hand switch HSU-C-FL-LD for motor drives has a display and four memory positions. The height and the stroke are set using the up-down buttons. The hand switch is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. The handset is characterized by a clear design and ease of use. They can be used with all of our motor drives..
Special features
User-defined and application-specific control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivestechnical advice
The hand switches with touch function require the Compacteco control with firmware version 1.9.
A manual switch with display is always required for programming and changing the stroke on site.
Features hand switchThe hand switch HSF-MDF-4M4-LD for motor drives has a display and four memory positions. The height and the stroke are set using the up-down buttons. The hand switch is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. The handset is characterized by a clear design and ease of use. They can be used with all of our motor drives..
Special features
User-defined and application-specific control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivestechnical advice
The hand switches with touch function require the Compacteco control with firmware version 1.9.
A manual switch with display is always required for programming and changing the stroke on site.
Y-cable for parallel operation with a length of 200mm. The terminals are made of brass with a nickel plated surface. The overmold is made of PVC.The cables are free of SVHC and CM. The operating temperature range is between 0°C and 85°C. You can find the suitable hand switch here.
The hand switch is characterized by a clear design and an ease of use. You can use it with the Compacteco control
as well as with any of our motor drives. This remote control consists
of an IR transmitter (incl. battery and holder) and R-receiver. For parallel operation of hand controls, you can obtain the appropriate Y-cable from us.Supply voltage5VDC+/- 10%Power consumption (average)75mALife endurance (Switching cycles)10.000Ambient temperature0 - 50°CCable length2070mm +/- 50mmDimensions (L,W,H)141mm x 129mm x 9,6mmwithout mounting plateWeight0,13kg (incl. cable)The hand switches with touch function need the Compacteco control with firmware version 1.9.For programming and varying of the stroke, a hand switch with display is required.
Features remote control set This remote control consists of a radio transmitter (including battery, holder and fastening screws), radio receiver and operating instructions. This remote control is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. It is characterized by a clear design and ease of use. They can be used with all of our motor drives..Special features
Stepless adjustmentUser-defined and application-oriented control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivesSpecial notes on remote control set
A manual switch with display is always required for programming and changing the stroke on site.
Features hand switchThe hand switch TOUCH basic-DN manual switch for motor drives has up-down buttons with which the height and the stroke can be set. The hand switch is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. The handset is characterized by a clear design and ease of use. They can be used with all of our motor drives.Special featuresUser-defined and application-specific control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivestechnical adviceThe hand switches with touch function require the Compacteco control with firmware version 1.9.A manual switch with display is always required for programming and changing the stroke on site.
Features hand switchThe hand switch HSU-C-FL-LD for motor drives has a display and four memory positions. The height and the stroke are set using the up-down buttons. The hand switch is freely programmable and can be used for user-defined and application-specific control of your stepless adjustment. The handset is characterized by a clear design and ease of use. They can be used with all of our motor drives..
Special features
User-defined and application-specific control and control of the adjustmentEase of useCan be used with the Compact control and all Ketterer motor drivestechnical advice
The hand switches with touch function require the Compacteco control with firmware version 1.9.
A manual switch with display is always required for programming and changing the stroke on site.
€71.52*
This website uses cookies to ensure the best experience possible. More information...