DC-Motor drive 24V 5 Nm

From €63.59 *

Prices incl. VAT plus shipping costs

Input:

Nominal torque:

  • 3133.48-0016-MAH11
  • 0.52 kg
Compact 24 V DC motor with worm gear and a continuous internal hexagon. Although the drive was... more
Product information "DC-Motor drive 24V 5 Nm"

Compact 24 V DC motor with worm gear and a continuous internal hexagon. Although the drive was developed for ergonomic table applications, it can be used in many other fields. A cable with AMP plug and an integrated Hall-sensor allows easy and secure control of the entire system. The included cable can be ordered here as a spare part. You can also order the matching spindle unit with motor adapter in our store.

Special features

  • Two integrated Hall-sensors for measurement of the revolutions and direction of rotation
  • Through going hexagon socket in wrench widths 6 mm and 9 mm
  • Good self-locking properties
  • Low noise
  • 1000 mm + 1750 mm motor cable with connector included
  • Can be combined with all Ketterer spindle systems

Technical notes

  • The drive working range (nominal torque) is determined for a service life of 10.000 double strokes.
  • Through the controller* the system is regulated such that the speed in the entire drive working range is kept as constant as possible.
  • By using a controller with a short-circuit brake the holding torque position of the drive can be increased. 
    *In combination with LogicData control box Compact-3


Model3133.48-00093133.48-0016
MotorDC Motor 24 VDC Motor 24 V
Sensor/Power supplyHall/5 V DC/0,3 AHall/5 V DC/0,3 A
Protection classIP30IP30
Duty cycle idle speed20% (at 5 Min.)20% (at 5 Min.)
Idle running speed100 rpm (24 V)100 rpm (24 V)
Rated torque*5 Nm5 Nm
Duty cycle nominal load20 s ON/ 240 s OFF20 s ON/ 240 s OFF
Short term peak torque (<1sec)8 Nm8 Nm
Inputhex 9mmhex 6mm 
* Load determined for service life of 10.000 double strokes
Related links to "DC-Motor drive 24V 5 Nm"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "DC-Motor drive 24V 5 Nm"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed