DC-Motor drive 24V

From €59.28 *

Prices incl. VAT plus shipping costs

Input:

Version:

Nominal torque:

  • 3133.00-1002-MAB111
Compact 24 V DC motor with worm gear and continuous internal hexagon. Although the drive was... more
Product information "DC-Motor drive 24V"
Compact 24 V DC motor with worm gear and continuous internal hexagon. Although the drive was developed for ergonomic table applications, it can be used in many other fields as well. A cable with AMP plug and an integrated Hall-sensor allows an easy and secure control of the entire system.

Special features

  • Two integrated Hall-sensors for measurement of the revolutions and direction of rotation
  • Continuous internal hexagon in wrench widths 6 mm, 7 mm, 9 mm
  • Good self-locking properties
  • Low noise
  • 100 mm + 1750 mm motor cable with connector included
  • Can be combined with most Ketterer spindle systems

Technical notes

  • To ensure secure operation the motor must be operated in the predefined installation position (see installation position/mounting).

  • The drive working range (nominal torque) is determined for a service life of 10,000 double strokes.
  • The connection position of the drive in the entire system with vibration damping elements can be beneficial. However, the functional reliability position of the drive in the application should be tested.
  • Through the controller* the system is regulated such that the speed in the entire drive working range is kept as constant as possible.
  • By using a controller with a short-circuit brake the holding torque position of the drive can be increased.

* In combination with LogicData control box Compact-3


Model3133.00-10023133.00-10033133.00-1009
Versionwith brakewith brakewith brake
MotorDC Motor 24 VDC Motor 24 VDC Motor 24 V
Sensor/Power supplyHall/5 V DC/0,3 AHall/5 V DC/0,3 AHall/5 V DC/0,3 A
Protection classIP30IP30IP30
Idle running speed120 rpm (24 V)120 rpm (24 V)120 rpm (24 V)
Duty cycle with idle running20% (at 5 Min.)20% (at 5 Min.)20% (at 5 Min.)
Rated torque*2,5 Nm2,5 Nm2,5 Nm
Duty cycle with 3,5 Nm20 sec ON 4min. OFF20 sec ON 4min. OFF20 sec ON 4min. OFF
Short-term peak torque (< 1 sec)5 Nm5 Nm5 Nm
Inputhex 6mmhex 7 mmhex 9 mm


Model3133.00-00163133.00-00173133.00-0011
Versionwithout brakewithout brakewithout brake
MotorDC Motor 24 VDC Motor 24 VDC Motor 24 V
Sensor/Power supplyHall/5 V DC/0,3 AHall/5 V DC/0,3 AHall/5 V DC/0,3 A
Protection glassIP30IP30IP30
Idle running speed120 rpm (24 V)120 rpm (24 V)120 rpm (24 V)
Duty cycle with idle running20% (at 5 Min.)20% (at 5 Min.)20% (at 5 Min.)
Rated torque*3,5 Nm3,5 Nm3,5 Nm
Duty cycle with 3,5 Nm*20 sec ON 4min. OFF20 sec ON 4min. OFF20 sec ON 4min. OFF
Short-term peak torque (< 1 sec)5 Nm5 Nm5 Nm
Inputhex 6 mmhex 7 mmhex 9 mm

* Determined at full load for service life of 10.000 double strokes
Related links to "DC-Motor drive 24V"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "DC-Motor drive 24V"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed