Motors

Our product group of motors consists of our gearmotors and BLDC motors. Both motors are considered powerful power packs with compact design and minimal noise characteristics. In addition, you will find spindle drives as a linear drive solution for stepless height adjustment. 

The use of our motors can be complemented by our control set. The components are available in parallel as individual elements in our store and can be selected according to your wishes. In addition to various hand controls, remote controls and motor cables can complete the use of the motors

Our product group of motors consists of our gearmotors and BLDC motors . Both motors are considered powerful power packs with compact design and minimal noise characteristics. In addition,... read more »
Close window
Motors

Our product group of motors consists of our gearmotors and BLDC motors. Both motors are considered powerful power packs with compact design and minimal noise characteristics. In addition, you will find spindle drives as a linear drive solution for stepless height adjustment. 

The use of our motors can be complemented by our control set. The components are available in parallel as individual elements in our store and can be selected according to your wishes. In addition to various hand controls, remote controls and motor cables can complete the use of the motors

Close filters
 
  •  
from to
2 From 2
No results were found for the filter!
BLDC Motor 24V digital Ø 44mm
BLDC Motor t-Rex 3200 digital Ø44 L97
Idle speed up to 4053 1/min Max torque 2 Nm Rated torque up to 0.3 Nm Rated speed up to 3767 1/min Features BLDC motor t-Rex 3200 I-44-89-L12 S2 14-pole BLDC motor with high-performance neodymium magnets and three digital Hall sensors...
From €317.73 *
Synchronteleskop-Spindeleinheit mit Motoradapter l Einbaumaß 500mm
Synchronous telescopic spindle unit with...
2 Varianten zur Auswahl l Hub 720 mm l Hubkraft 900 N l Verfahrweg 40mm/s l Maximaler Hub bei minimalem Einbaumaß Twofold telescopic lifting unit with bevel gear head for various linear drive solutions. Ideal for electromotive sit-stand...
From €53.19 *
Spindeleinheit mit Motoradapter ohne Motorbefestigung
Spindle unit with motoradapter
Installation dimension 589 l Stroke 525 l Lifting force 900 N l Travel 20mm/rev l With and without motor mounting l Travel speed 40mm/s l Universally applicable lifting unit with a bevel gear head for linear drive solutions. Possible...
From €48.84 *
Getriebemotor innen 6kt SW6 / 5,2A / 3 Nm
DC gear motor 24V l 3Nm l drive inside hexagon...
Rated torque 3 Nm Idle speed 150 rpm Outer dimensions 150x76x40 mm . Drive inside hexagon SW6/SW7/SW8 Powerful 24 V DC motor with 2-stage worm gear with a continuous internal hexagon on the output. The motor cable with AMP plug and the...
From €109.27 *
Inline Spindelantrieb 100 bis 500mm Hub
Inline spindle drive 100 to 500mm stroke
Motorized solution for the individual sit-stand workplace. Stepless height adjustment to customer specific stroke. Th e included cable can be ordered here as a spare part. Special features A sleek design allows the complete inline...
From €139.90 *
DC Getriebemotor 24V l 5 Nm l Antrieb 6kt SW6
DC-Motor drive 24V 5 Nm
Compact 24 V DC motor with worm gear and a continuous internal hexagon. Although the drive was developed for ergonomic table applications, it can be used in many other fields. A cable with AMP plug and an integrated Hall-sensor allows...
From €63.59 *
DC Getriebemotor 24V 3,5Nm innen 6kt SW6 / 5,2A / 3,5 Nm / ohne Adapterplatte
DC-Motor drive 24V 3,5Nm
Compact 24 V DC motor with worm gear and a continuous internal hexagon. Optimized sound characteristics due to elastic coupling and vibration damping fastening elements. Although the drive was developed for ergonomic table applications,...
From €80.86 *
DC-Motor mit Getriebe 24V l 2,5 Nm l 6kt SW 7
DC-Motor with gear 24V
Compact 24 V DC motor with worm gear and continuous internal hexagon. Although the drive was developed for ergonomic table applications, it can be used in many other fields as well. A cable with AMP plug and an integrated Hall-sensor...
From €66.70 *
DC Getriebemotor 24V l 2,5 Nm l 6kt SW 6 Zeichnung
DC-Motor drive 24V
Compact 24 V DC motor with worm gear and continuous internal hexagon. Although the drive was developed for ergonomic table applications, it can be used in many other fields as well. A cable with AMP plug and an integrated Hall-sensor...
From €69.75 *
DC Getriebemotor l 6kt SW6 l 115 U/min l 5 Nm
DC 18 gear motor with integrated position...
Features DC geared motor Compact motor drive with a continuous hexagon socket and integrated displacement encoder. The geared motor can be ordered with an idle speed of 115 rpm or 230 rpm. The geared motor serves as a simple upgrade from...
From €74.97 *
2 From 2
Viewed